MAGICXPRESS MX33VX - R Card Type Modem/Fax card Chip Set Unidentified I/O Options Line out, phone in, serial port, power jack, microphone in, speaker out Maximum Modem Rate 33.6Kbps Maximum Fax Rate 14.4Kbps Data Modulation Protocol Bell 103A/212A ITU-T V34, V.32bis, V.32, V.22bis, V.23, V.22, V.21, Rockwell V.FC Fax Modulation Protocol ITU-T V.17, V.27ter, V.29, T.4, T.30 Error Correction/Compression MNP5, V.42, V.42bis Fax Class Class I Data Bus External [Image] CONNECTIONS Function Label Function Label Line out CN1 Power jack CN4 Phone in CN2 Microphone in CN5 Serial port CN3 Speaker out CN6 DIAGNOSTIC LED(S) LED Color Status Condition PWR Unidentified On Power is on PWR Unidentified Off Power is off AA Unidentified On Auto-answer mode enabled AA Unidentified Off Auto-answer mode disabled TR Unidentified On DTR signal is high TR Unidentified Off DTR signal is low RD Unidentified Blinking Modem is receiving data RD Unidentified Off Modem is not receiving data SD Unidentified Blinking Modem transmitting data SD Unidentified Off Modem not transmitting data OH Unidentified On Modem is off-hook OH Unidentified Off Modem is on-hook CD Unidentified On Carrier signal detected CD Unidentified Off Carrier signal not detected HS Unidentified On Modem is operating at 24Kbps or higher HS Unidentified Off Modem is not operating at 24Kbps or higher MR Unidentified On Modem is receiving power MR Unidentified Blinking Modem is in self-test mode SUPPORTED COMMAND SET Basic AT Commands AT, ‘+++’, A/ A, B, C, E, H, M, O, P, Q, T, V, X, Y, Z &C, &P, &R, &T, &V, &W, &X, &Y, &Z Extended AT Commands \A, \B, \G %C, %L, %Q S Registers S0, S1, S2, S3, S4, S5, S6, S7, S8, S9, S10, S11, S12, S14, S16, S18, S21, S24, S25, S27, S29, S30, S31, S32, S33, S38, S91, S92, S95 Note: See MHI Help File for full command documentation. Proprietary AT Command Set For a full command summary, see MAGICXPRESS MX33V - R.